Can you use a pressure washer as a sewer jetter?


You can use a pressure washer with a sewer jetter attachment to unclog your drain. The pressure washer doesn’t pressurize your pipe but uses high-pressure water to move through your pipes and break apart buildup. The sewer jet is a long piece of flexible hose with a jet nozzle on one end.

Can I do hydro jetting myself?

The biggest reason that you should never attempt to handle hydro-jetting yourself is that it is not safe. Either for you or your pipes. The water that comes out of the nozzle is at a minimum pressure of 7500 psi (pounds per square inch) and often much higher.

How much PSI does a sewer jet need?

Hydro jetting uses a specialized hose and nozzle to shoot water through your pipes at a force of around 1500 psi on average (although that number can rise to 5000 psi), which is one reason you need a skilled plumber to do the job.

Can Hydro jetting damage clay pipes?

The sheer force of the water jet might not harm steel, copper or PVC pipe, but it could cut through or break clay pipes by accident. If your home uses its own septic system instead of a municipal sewer hookup, you may want to avoid hydro jetting.

Can you HydroJet through a toilet?

There are a lot of advantages that the HydroJet has over the traditional plumbing snake. For one, it can be easily used in both sinks and toilet bowls without needing special variations.

What size Jetter hose do I need?

Generally speaking, the larger the pipe you are clearing, the more flow from the pump on your jetter is required. If the majority of your work is 100-150mm, a flow rate between 21-25 lpm is ideal as you can use a small diameter 3/16” hose from a Mini Reel without overworking the pump.

How much psi do I need to cut roots?

For example, if you’re looking to cut through grease, hard-packed dirt, or tree roots, PSI should be your main focus. Generally, 3,500 to 4000 PSI with a flow of at least 6 gallons per minute is capable of breaking through most of these blockages.

Is sewer jetting worth it?

Safe for your pipes: When done by a trained professional, hydro jetting can clear your pipes of debris safely and effectively, which not only helps with water and waste flow, but also increases the longevity of your pipes and cuts down on your water bills, as your system is now more efficient.

What is Backjetting?

Back flow – when water from one system backs into any part of the main distribution system. Back flow preventer – a device that stops back flow – required for sprinkler systems and handheld showers. Backjet – Whirlpool jets located on the fixture wall behind a reclining bather.

Can you use air pressure to unclog a drain?

In most cases, running the air for three to five minutes provides enough pressure to clear the clog. After several minutes, turn off the compressor and remove the rags and wand from the drain. Run the water to see if the drain is clear.

Is Hydro Jetting safe for old pipes?

Yes, hydro-jetting is completely safe for your pipes when done by a licensed plumber. The water pressure used is nowhere near enough to cut into a normal pipe. Hydro-jetting can be safer than using a metal snake in many situations, too. However, hydro-jetting should be avoided for very old pipes in poor condition.

How effective is hydro jetting?

Hydro jetting has proven to be significantly effective in residential housing by removing silt within home plumbing pipes. This is a good alternative to manual cleaning using a plumbing snake. It also takes up less time with better results.

Is Hydro Jetting necessary?

When Is It Needed? Plumbers prefer hydro jetting when the water system is impaired with severe clogs that keep recurring. The interior of pipes often scales up with debris, grease, and mineral buildup, which causes clogging and slow draining. When this issue escalates, it can result in sewer backups.

What is a sewer nozzle?

Sewer jetting nozzles perform the tough work of dislodging debris in the drain pipe. These jetting nozzles blow the debris down the pipe where it can be removed. Jetter nozzles come in a variety of types that are designed to perform different tasks in the pipe.

How do I clean my jetter nozzle?

Detach the jetter hose from the pressure washer, then use the pin to gently clean any clogged orifices, taking care not to force it into too small an opening. Reattach the jetter hose to the pressure washer and check to ensure that the hose is now working normally.

Can Hydro jetting damage cast iron pipes?

Notably, hydro-jetting is 100% safe for all types of pipes, including: Clay pipes. Cast iron pipe. Steel pipe.

Can you hydrojet PVC pipe?

If your home does not have older pipes, you may wonder if hydro jetting is safe for newer pipes, specifically PVC pipes. According to professional plumbers, the answer is yes, it is safe for PVC pipes and most other types of plumbing.

Does Hydro jetting clear roots?

Hydro jetting is an excellent way to remove roots from your pipes. The highly pressurized blast of water will take tree roots out of the pipes, breaking them down and flushing them out of the interior.

Will water jetting clear roots?

Hydro-jetting is an excellent tool for removing tree roots from your plumbing pipes. The water’s extreme pressure cuts tree roots out of the lines, breaking them down and shooting them out of the interior. After plumbers use a drain snake to break up roots that are too thick, hydro-jetting clears away the debris.

How do you get unstuck from Jetter?

The best advice we’ve heard to free a stuck sewer jetter is to start by running water at low pressure through the jetter for about an hour to flush away any loose sediment that’s near the jetter nozzle.

What is a jetter hose?

Jetting hose is lightweight, abrasion resistant, slippery and pushable when inside pipe. Jetting nozzles are designed to pull the hose into the line and provide proper cleaning.

What kills roots in sewer lines?

Copper sulfate is a natural herbicide and will kill off the small tree roots invading your sewer pipes. Flushing half a cup of the crystals down the toilet should do the trick.

How long does it take copper sulfate to dissolve roots?

It can take as little as two or three days to clear out the line. However, if your system has a slower flow of water, it can take a bit longer (up to a week) to get rid of the roots. By contrast, copper sulfate takes up to four weeks to even start the process of root decay.

Will sulfuric acid dissolve tree roots?

Sulfuric acid works by disintegrating organic matter such as tree roots, rags, soap scum, hair, sanitary napkins, paper, grease, fats, and food residue. Once the organic matter disintegrates, it can be easily flushed by water.

Similar Posts