What is a good size pressure washer for home use?


The most versatile category of pressure washers, those ranging from 2,000 to 3,200 PSI effectively clean cars (including the most well-used off-road vehicles), home siding, fences, boats and grimy garage floors. Those closer to 3,200 PSI work effectively on tough stains, too.

Is a 2000 psi pressure washer good for driveways?

To clean concrete effectively, use a power washer with a pressure rating of at least 3000 psi and a flow rate of at least 4 gallons per minute (gpm).

How many psi power washer do I need?

In general, for cleaning a deck with a pressure washer, you should use the lowest pressure setting. These should be effective and prevent high-pressure water damage. Softwoods such as pine and cedar require 500 to 600 psi, while harder woods range between 1200 to 1500 psi.

Is 2000 psi enough to pressure wash a house?

Medium Duty 2000-2800 PSI

You can use a medium-duty pressure washer for almost any surface. They’re great for cleaning concrete, brick, and wood. They work especially well for cleaning patios, sidings, roofs, decks, and fences.

Will a 1600 psi pressure washer clean concrete?

Concrete and asphalt require more cleaning power. You’ll want to use the turbo nozzle on the 1600 PSI for hard-to-clean driveways, sidewalks, and patios as well as brick paving.

Is 1700 PSI pressure washer enough?

How Much PSI is Enough? Light-duty pressure washers in the 1,300 to 1,700 PSI range are great for cleaning patio furniture, lawn equipment, stairs, and vehicles such as automobiles and small SUV’s.

What should I look for when buying a pressure washer?

Find the Best Pressure Washer

That power is measured by pressure output — in pounds per square inch (PSI) — and water volume — in gallons per minute (GPM). A pressure washer rated with a higher PSI and GPM cleans better and faster but often costs more than lower-rated units.

Can a 2000 psi pressure washer clean concrete?

There’s no doubt that electric pressure washers from 1,300 to 2,300 psi can wash a concrete driveway, but it’ll take longer. If you have a large driveway with lots of stains, you’ll want more power to do the job faster.

Can you damage concrete by power washing?

The quick answer is yes, power washing can degrade a concrete surface. You can notice visible damage from water pressure at the level at which even light-duty power washers can operate. Therefore, if you aren’t careful, you can cause irreversible damage to your driveway or patio.

Is 4000 PSI too much pressure washer?

Industrial or Commercial Grade Gas Pressure Washer

If you’re using your pressure washer to strip flaking paint, you want as much pressure as possible. Commercial and industrial grade pressure washers boast streams of up to 4000 PSI. Don’t use this on your car, as it can dull the clear coat on your paint.

Is 2000 PSI enough to clean deck?

For cleaning a wooden deck, you’ll be best served by using the lowest pressure setting that’s still effective. For soft woods like cedar or pine, this is usually about 500 to 600 psi. For harder woods, it can go up to 1200 to 1500 psi.

What PSI will remove paint?

Selecting a pressure washer with a range of 2,000 psi to 4,000 psi will give you the most effective power for removing peeling paint. With pressure washers, as with all power equipment, always wear protective goggles and closed-toe shoes. Prepare the area around the structure you are working on.

What can I clean with a 2000 PSI pressure washer?

Light-duty pressure washers are rated at 2,000 PSI or less and are suitable for cleaning automobiles, motorcycles, boats, bicycles and all-purpose cleaning. Medium-duty pressure washers produce 2,000 to 3,000 PSI and can be used to remove grease and grim from concrete, sidewalks, decks and siding.

What PSI should I use to clean siding?

Gas will give you more power, but you really only need 1300 to 1600 PSI for most exterior cleaning needs, including vinyl siding. Gas pressure washers usually range from 2000 – 4000 PSI and cost more than electric.

What is a 1600 psi pressure washer good for?

It is great for use on bikes, campers, grills, patio furniture and many other recreational applications. This unit includes three nozzles: 15, soap, and turbo for 50% faster cleaning. The Ryobi 1600-PSI Electric Pressure Washer combines portability with convenience for a unit that can go anywhere to get the job done.

How much PSI do you need to clean a garage floor?

So what kind of pressure washer should you use for a garage floor? For a bare concrete garage floor, a gas-powered pressure washer with a minimum rating of 3,000 PSI and a water flow rate of 3 GPM or more is recommended. Anything less will not be as effective and will take longer to get the job done.

Is 1800 PSI power washer good?

The Greenworks 1800 PSI (GPW 1803) is a good entry-level electric pressure washer. With its included array of nozzles (below) it can do a wide range of cleaning tasks, from washing cars to stripping paint (at a slow rate).

Is 1800 PSI good for cars?

In fact, the best PSI for car wash that can effectively and safely clean a car is around 1200 to 1900 PSI. The max PSI for car wash you can use should be only 1900 PSI. So to be safe, use a pressure washer with a PSI around the range of 1200 to 1900 PSI.

What is more important in a pressure washer PSI or GPM?

GPM is usually more important to contractors than PSI. Since most contractors use cleaning chemicals to do all of the cleaning, their job becomes one primarily of rinsing the dirt away.

What is the difference between a power washer and a pressure washer?

The main difference with power washing vs. pressure washing is the heat. The jet wash in a power washing machine uses heated water, whereas the water in a pressure washer is not heated.

Is owning a pressure washer worth it?

Even if owning a pressure washer is technically cost-effective in the long run, the hassle of storing and maintaining one might not be worth the money you save. Owning a pressure washer is kind of like owning a lawnmower—they take up a lot of space, require maintenance, and you have to winterize them.

Should I seal my concrete driveway after pressure washing?

It All Begins With Pressure Washing the Driveway

However, getting out all of the dirt and grime along with stains is a must before permanently securing them onto the driveway’s surface with a sealer.

Is it OK to power wash pavers?

Pressure washing concrete pavers, especially newer ones, can easily damage the surface finish and we strongly suggest not pressure washing unless you are highly experienced and have the right equipment to pressure wash pavers. In most cases, to get pavers clean with a pressure washer it requires using a jet style tip.

What PSI will etch concrete?

Though you need to check your actual pressure. 2500-2600psi plenty for residential. Lots of people are suggesting your driveway cleaning video.

What is the strongest PSI for a pressure washer?

Within Gas Pressure Washers, the highest PSI is 4500 PSI PSI. At the Home Depot, we consider up to 1899 PSI light duty for vehicles or outdoor furniture. Medium duty, which is recommended for fences or patios, is between 1900 – 2799 PSI. Heavy duty is 2800+ PSI, which is recommended for driveways or to strip paint.

What does 4000 PSI feel like?

It takes about 1/4 solid aluminum to hold back that much pressure, and they compress about 90 minutes of life-giving air into a small tank on your back. 4000 psi is enough to cut your arm off with water. That’s pretty much it.

Will a 3000 psi pressure washer strip paint?

To correctly strip old paint, you should work with a power washer with a psi of 2000 or higher. Even starting out at 2000 probably won’t do the trick and you’ll need to set the psi closer to 3,000 for effective paint stripping.

Do you need to power wash a house before painting?

So, yes — you should power wash your house before painting so that the new coat of paint will properly bond to your home exterior. Power washing is the key to ensuring a long-lasting paint job every time.

Can you pressure wash paint off brick?

Meyer and Vaughan both said a combination of carefully chosen chemical strippers and power washing at low pressure generally do an excellent job of removing the paint without damaging the brick.

Is 2700 PSI good for a pressure washer?

For home use or general purpose use, pressure washers under 3,000 PSI are ideal. For industrial use, pressure washers with a 3,000 PSI and above are ideal.

What should I spray my house with before pressure washing?

Using a 5-gallon water bucket, mix water and a cleaning detergent with mildewcide according to manufacturer’s recommendations. Attach your pressure washer to your garden hose. Choose the pressure washer nozzle you plan to use and attach it to your sprayer.

How high will a pressure washer reach?

You should be able to reach up to 60 feet if you use 4000 PSI. You’ll only reach up to 40 feet if you use 3000 PSI.

How do you pressure wash a two story house from the ground?

Hold the spray wand with both hands and aim the water at a 45-degree angle. Avoid using the pressure washer for too long in one spot as this can damage the siding. You should also be careful when washing around windows and screens. Once you’ve done a 10-foot section, repeat the same steps all the way around the house.

Can you pressure wash with just water?

Put On A High-Pressure Nozzle And Rinse The Mess Away!

Then, you’ll clean the detergent and grime away from top to bottom using just high-powered water. For bonus points, use a hot water pressure washer! The heat will further the cleaning capabilities.

Similar Posts